Master 400/800 Electrical Specifications
| Specification | Value |
|---|---|
|
Power Supply Voltage |
+48 VDC |
|
Power Supply Current (Max.) |
10 A |
|
Power Draw (Min.) |
5.76 W |
|
Encoder Signal Voltage |
Differential (5 VDC) |
|
Digital Input Voltage Range |
Logical LOW: 0 to +0.1 VDC Logical HIGH: +3.3 to +24 VDC |
|
When using a Master hub, the chassis must be well grounded. |
|
The power supply must be isolated from AC ground. This means that AC ground and DC ground are not connected. |
|
|
The Power Draw specification is based on a Master with no sensors attached. Every sensor has its own power requirements that need to be considered when calculating total system power requirements.. |