Gocator Cordsets

Gocator sensors use two types of cordsets: the Power & Ethernet cordset and the I/O cordset.

When connecting cordset connectors to the sensor's connectors, do not exceed a torque of 2 Nm (18 in-lbs). Ensure that you properly secure the cordset cabling to avoid stress loading on the sensor connectors.

The Power & Ethernet cordset provides power and laser safety to the sensor. It is also used for sensor communication via 1000 Mbit/s Ethernet with a standard RJ45 connector. The Master version of the Power & Ethernet cordset provides direct connection between the sensor and a Master network controller, excluding Master 100 (for more information, see Master Network Controllers).

The I/O cordset provides digital I/O connections, an encoder interface, RS-485 serial connection, and an analog output.

The maximum cordset length is 60 m.

See Gocator I/O Connector and Gocator Power/LAN Connector for pinout details.

See Accessories for cordset lengths and part numbers. Contact LMI for information on creating cordsets with customized lengths and connector orientations.